Wfq Micro-Computer Automatic Slitting Machine

• Application: Machinery&Hardware
• Type: High-Speed Slitting Machine
• Work Method: Round Knife Cutting
• Structure: Guide Roller Part
• Packaging: Case
• Classification: Plastic Film Slitting
• Model NO.: WFQ
• Applicable Process: Slitting
• Suitable Substrates: Paper
• Packaging Material: Wood
• Transport Package: Wooden Case
• Specification: 2380*1540*1370mm
• Trademark: YIZHAN
• Origin: China
• HS Code: 84411000
• Production Capacity: 10sets/Month

Product Description

WFQ1000/1300 slitting machine



Overview
This machine is suitable for slitter  kinds of plastic film, cellophane, paper and other reel material.
This machine adopts microcomputer automatic control tension, meter, LPC, etc, with photocell tracking, automatic correction, speed control, automatic meter function.

Main technical parameters

Model	WFQ-1000	WFQ-1300
Reel size	Width:max 1000mm	Width:1300mm
Max Unwinder Diameter:	Φ600mm,paper core  Φ76mm
Max rewinding diameter	Φ400mm,paper core  Φ76mm
Slitter width	25-1000mm	25-1300mm
slitter speed	0-150m/min
Deviation	<0.5mm
tension control	0~5  N·m
total power	6.0KWS
oversize(L×W×H)	2380×1540×1370mm	2300×1840×1320mm

The basic structure and working principle:
1.  original reel material, setting unwinding and rewinding tension ,adjust unwinder and rewinder are parallel, according drawing  1  to adjust  wheel "B" , otherwise  will be  produce chuo lines when machine running.
2. LPC control by the photocell(futai), controller and motor composition, it   could be tracking  line or edge.
3.  main roller running speed by panasonic frequency inventer motor control, according to work requires to adjust positioning, the speed meter to indicate speed.
4. tension control

1. unwinding  tension control by microcomputer, magnetic powder brake composition, by adjusting the sensing roller on both ends of the screw, make both ends consistent pressure, and setting preset tension.
2. rewinding  tension control by the air shaft and the magnetic powder clutch to control. Tension by adjusting magnetic powder clutch current control the  rewinding tension.
3. (1) adjust flat knife cutting size (according  flat knife  ruler )put  down flat cutter for cutting , the lat knife f used in PE, PP, OPP plastic film. Circular knife is applicable to paper, aluminum foil more  hard material. (need circular knife , customer need order again)
4. If the original material roll error too big, its better use slitting  machine rewinding again after slitter. if encounter  joint or break line, correction controller will appear out of control state, at this time, should reduce speed, to adjust again.

Equipment standard parts list:

NAME	QTY	ORIGIN	REMARK
Rewind  rouller	2	zhejiang	Air shaft
Unwind  roller	1	zhejiang	Air shaft
Frequency motor	1	anhui	5.5KW
Frequency inventer	1	Germany	SEMENS
clutch	2	Ningxia	rewinding
braker	1	Ningxia	unwinding
LPC system	1	shuanxi
LPC motor	1	jiangsu	90W
LPC screw	1	jiangsu
LPC photocell	1	Taiwang	Futai
blower	1	Jiangsu